FAQ
Frequently asked questions
About the machine, the bags, and how a lobby project is ordered.
THE MACHINE
A lobby machine that gives a guest a disposable sleeve so a wet umbrella can be bagged at the door instead of dripping on the floor.
Head count is about stocking, not umbrella length. A single head carries one sleeve roll — with the wide mouth it sleeves long umbrellas too. Dual head carries short and long sleeves side by side, so a busy main door stocks both from one stand.
No. Wrapping is mechanical — the guest pushes the umbrella in and the sleeve follows. Nothing to plug in, no electrical service interval, no downtime if a socket fails. The only powered option is a low-bag alert on a removable cell, and the machine wraps without it.
No. The machine is free-standing by design: its own body weight, plus the water collected in the drip tray, keeps the base planted. Nothing is drilled, glued or anchored — polished stone, rented lobbies and listed buildings stay untouched. On wheeled models, tilt it back onto its two rear casters and one person rolls it to the door when rain is forecast, and back to the store room when the season ends.
It is not a light rack. The weighted metal body and the water in the tray hold the base down through daily guest use, and the anti-slip pads stop it walking on marble. Exact stability notes for your floor are confirmed on quote.
BAGS
Yes. Wet-umbrella bags ship separately and are sized to the dispenser. Replacement orders are the normal repeat, not the machine.
Both are offered. PE is the general choice; a biodegradable sleeve is available where policy asks for it.
Two lengths cover folding and long umbrellas. A dual-head machine uses both.
On distributor lots, bag printing with your branding is possible. See OEM.
ORDERING
Yes. A sample unit lets you place it at a real entrance before committing to a lot.
A sample is one unit. Distributor lots start higher and open OEM branding. We quote the lot size that fits your entrances.
Export inquiries are welcome. Freight and packaging are arranged per destination on quote.
A lobby project is quoted per entrance — head count, bags, branding and freight change the number. Send door photos, dimensions and a footfall note and we price your specific doors from those; no site visit, no shelf price.
More worth than a fixed installation, because nothing is fixed. A wheeled machine rolls out of the store room when rain is forecast and back when the season ends, so dry months cost you nothing but storage space. A single heavy shower a week can still soak a marble lobby — tell us your city and door, and we will give an honest recommendation.
Usage tracks footfall and weather, not a fixed number. The first stock ships included with every machine; on quote we size the restock against your entrances and set a sensible reorder rhythm — we do not invent a consumption figure here.
ACCESSORIES & PLACEMENT
The sleeve mouth and guide ring, the bag cartridge the roll sits on, the foot pads and, on wheeled models, the two rear tilt casters. They are listed by group on the accessories page and ship as a spares kit.
Only floor-friendly parts: anti-slip pads, a stone-safe floor pad and level shims for uneven thresholds. All optional — the machine stands on its own weight without any of them, and wheeled models roll on their own rear casters. There are no screws or anchors in the crate.
No. It catches the last drops under the mouth and is emptied by hand on the normal cleaning round. There is no plumbing at any entrance. The collected water also adds welcome weight to the base.
Usually yes, once. A first order takes the machine, two rolls and a tray together so the door works the day it arrives. Pads and shims are optional; after that only bags and pads repeat.
Request a Quote
Tell us which entrances need covering and how many. We price a lobby project per door — head count, bags, branding and freight — rather than a fixed shelf price.